Factory Built Drag Car

2021 Dodge Challenger Drag Pak

- The quickest, fastest, most powerful Drag Pak that Dodge has produced to date
- 1 of 50 produced. This one is Number 49. Last White One.
- Never Tracked, though times are recorded in others at 7.5 second quarter mile

Factory Built Drag Car Specs:
- 354 CI HEMI V-8 engine
- Whipple 3.0L twin-screw supercharger
- MOPAR cast aluminum block with Billet steel main caps
- Bore and stroke: 4.070 x 3.400
- Billet crankshaft
- Forged H-beam rods
- Forged 2618 alloy pistons
- Mopar spec with 0.675 inch lift camshaft
- Race ready 3-speed TH400 transmission with SFI case and lightweight aluminum driveshaft
- 10 inch high performance torque converter
- Tappets-mechanical roller
- 1.80:1 In, 1.85:1 Ex ratio rocker arms
- Valve Springs- dual drag race spring
- Aluminum 2.20 inch, 1.68 ex valves cylinder heads
- Internal wet sump oil pump
- Fabricated aluminum pan
- Electric water pump
- SFI approved ATI Performance Products 'Super Damper'
- Billet aluminum 109mm throttle body
- American Racing headers
- SFI-certified drag race fuel cell
- Brushless racing pump with dual inline filters
- Strange Engineering custom Drag Pak axle
- 9 inch aluminum center section
- 40 Spline gun-drilled 'Hy-Tuf' axles
- 4.11:1 final drive ratio
- 4 inch diameter aluminum X 0.125 inch wall thickness driveshaft
- 1350 Spicer u-joints
- Holley Dominator EFI and 7 inch digital dash
- Functional wheelie bars and parachute
SOLD ON BILL OF SALE

(Please note: If you happen to be viewing this 2021 Dodge Challenger Drag Pak on a website other than our Garage Kept Motors site, it's possible that you've only seen some of our many photographs of the car due to third-party website limitations. To be sure you access all the more than 120 photographs, as well as a short start-up and walk-around video, and a link to its accident and damage-free Carfax history report, please go to our main website: Garage Kept Motors.)

“2021 Dodge Challenger Mopar Drag Pak is the quickest yet” – MotorAuthority, September 2020

The website continued: “… if you're really serious about hitting the strip, you should look no further than the Dodge Challenger Drag Pak specials, a new version of which was unveiled on Wednesday. Offered via Mopar, the Challenger Drag Paks are dedicated, turnkey drag racers designed for National Hot Rod Association and National Muscle Car Association classes. This means they get a full roll cage fabricated to NHRA and NMCA specifications, along with other mandated safety gear. The latest 2021 Challenger Drag Pak, according to Dodge, is the quickest yet, at least when it's powered by the 5.8-liter supercharged V-8 on offer. How quick? We're talking a quarter-mile ET in the seven seconds."

"Dodge hasn't said how much horsepower makes the feat possible, but we know the engine, which is approved for NHRA FSS and NMCA classes, is aided by a newly developed 3.0-liter Whipple twin-screw supercharger, upgraded internals, a new accessory drive, and a new aluminum ice tank to keep the intercooler extra cool. The other big change for the 2021 model is a new suspension setup. It incorporates a new four-link rear setup that helps the car launch harder and stay planted throughout the run, i.e., reducing wheelspin. You'll find longer control arms, a wishbone link for lateral control (replacing a Panhard bar in prior models), plus a thicker anti-roll bar (250% stiffer than prior models).”

The full MotorAuthority article is available online at: https://www.motorauthority.com/news/1129489_2021-dodge-challenger-mopar-drag-pak-is-the-quickest-yet

Offered here is a brand-new, 0-mileage, 2021 Dodge Challenger Drag Pak in its characteristic white with blue-and-red-graphics livery over black. All aspects of the car—aesthetics, equipment, interior and exterior surfaces— are literally as-new. This not-for-street-use, estimated 200-mph-capable car is number 49 of just 50 produced for 2021, and the very last one painted white. It will be sold on a Bill of Sale as the Drag Pak cars are manufactured without a VIN. The car's many special performance features and equipment are listed in detail nearby and should be carefully reviewed. Down to its rear-mounted parachute, this is a “for serious racers only” offering.

The exterior red-white-and-blue color scheme is striking, and the MOPAR graphics make it absolutely clear this is a Dodge-factory-created, quarter-mile race car. The many exterior touches—including hood scoop and twin hood air-intake grilles, front chin spoiler, door-mounted cabin-air intakes, race-style fuel filler-cap, black rear-deck spoiler, “wheelie” wheels, Simpson® racing parachute, and Moroso® electrical-cut-off pull-handle—are true racing-spec equipment, not style-based add-ons. Factory badging (in addition to the graphics) includes the “SRT” grille emblem, side “dragpak” identification, and rear D-O-D-G-E lettering. Dragpak and Wells Racing®-identified black, split-10-spoke wheels are mounted with white-lettered Mickey Thompson® “ET Front M/T” tires and rear slicks.